User`s guide
Table Of Contents
- Legal Information
- Equipment Operation
- General Safety Considerations
- Regulatory Information
- List of Related Publications
- Agilent TechnologiesE4418B Options
- About this Guide
- Getting Started
- Power Meter Operation
- Introduction
- Battery Operation (Option 001)
- Zeroing and Calibrating the Power Meter
- Making Measurements with the AgilentE-Series Power Sensors
- Making Measurements with the Agilent8480 Series Power Sensors
- Making Measurements using Sensor Calibration Tables
- Making Measurements using Frequency Dependent Offset Tables
- Setting the Units of Measurement
- Selecting Units of Measurement from the Softkeys
- Making Relative Measurements
- Setting the Resolution
- Setting Offsets
- Setting Averaging
- Measuring Pulsed Signals
- Setting Measurement Limits
- Selecting a Digital or Analog Display
- Setting the Range
- Configuring the Remote Interface
- Recorder Output
- Saving and Recalling Power Meter Configurations
- How Measurements are Calculated
- Presetting the Power Meter
- Self Test
- Operator Maintenance
- Contacting Agilent Technologies
- Menu Reference
- Error Messages
- Specifications
Power Meter Operation
Contacting Agilent Technologies
2-74 Agilent E4418B User’s Guide
Contacting Agilent Technologies
This section details what to do if you have a problem with your power
meter.
If you have a problem with your power meter, first refer to the section .
This chapter contains a checklist that will help identify some of the most
common problems.
If you wish to contact Agilent Technologies about any aspect of the power
meter, from service problems to ordering information, refer to “Sales and
Service Offices”, on page 2-77.
If you wish to return the power meter to Agilent Technologies refer to
“Returning Your Power Meter for Service”, on page 2-79.
Before calling Agilent Technologies
Before calling Agilent Technologies or returning the power meter for
service, please make the checks listed in “Check the Basics”, on page 2-75.
If you still have a problem, please read the warranty printed at the front
of this guide. If your power meter is covered by a separate maintenance
agreement, please be familiar with the terms.
Agilent Technologies offers several maintenance plans to service your
power meter after warranty expiration. Call your Agilent Technologies
Sales and Service Center for full details.
If the power meter becomes faulty and you wish to return the faulty
instrument, follow the description on how to return the faulty instrument
in the section “Sales and Service Offices”, on page 2-77.
HP4402.book Page 74 Wednesday, November 29, 2000 4:46 PM