User`s guide
Table Of Contents
- Legal Information
- Equipment Operation
- General Safety Considerations
- Regulatory Information
- List of Related Publications
- Agilent TechnologiesE4418B Options
- About this Guide
- Getting Started
- Power Meter Operation
- Introduction
- Battery Operation (Option 001)
- Zeroing and Calibrating the Power Meter
- Making Measurements with the AgilentE-Series Power Sensors
- Making Measurements with the Agilent8480 Series Power Sensors
- Making Measurements using Sensor Calibration Tables
- Making Measurements using Frequency Dependent Offset Tables
- Setting the Units of Measurement
- Selecting Units of Measurement from the Softkeys
- Making Relative Measurements
- Setting the Resolution
- Setting Offsets
- Setting Averaging
- Measuring Pulsed Signals
- Setting Measurement Limits
- Selecting a Digital or Analog Display
- Setting the Range
- Configuring the Remote Interface
- Recorder Output
- Saving and Recalling Power Meter Configurations
- How Measurements are Calculated
- Presetting the Power Meter
- Self Test
- Operator Maintenance
- Contacting Agilent Technologies
- Menu Reference
- Error Messages
- Specifications
Power Meter Operation
Presetting the Power Meter
Agilent E4418B User’s Guide 2-65
• is not affected.
• is not affected.
• is not affected.
• is not affected.
• is not affected.
• is not affecetd.
• is not affected.
• is not affected.
• is not affected.
• is not affected.
• is set to “On”.
• is set to “AUTO”.
• is set to “Off”.
• is set to 1.000%.
• is set to “Off”.
• is set to 0.000 dB.
• is set to “AUTO”.
• is set to 90.000 dbm ( ) and -90.000 dBm ( ).
• is set to “Off”.
• is set to “Off”.
• is set to 100.0 mW ( ) and 0.00 W
().
• is set to “Off”.
• is not affected.
• is set to “On”
• is set to 100%.
• is not affected.
• is set to “Off”.
Command Set
Select Interface
GP-IB Addr
Baud Rate
Word size
Stop bits
Parity
Pacing
Echo
Table Off/On
Filter Off/On
Filter
Duty Cycle Off/On
Duty Cycle
Offset Off/On
Offset
Range
Limits
Max Min
Limits Off/On
Power Ref Off/On
Recorder Output
Max Power
Min Power
Output Off/On
Must Cal Off/On
Backlight
Zero
Cal
Ref CF
Must Cal Off/On
TTL Inputs Off/On
HP4402.book Page 65 Wednesday, November 29, 2000 4:46 PM