Product specifications

4
Arrowkeys
Allow positioning of the
cursor for editing purposes and
for character selection.
Zero/cal
Zero: Fully automatic
digital zero corrects
for residual offsets.
Cal: Fully automatic
sensor calibration.
Power ref
1.00 mW, 50 MHz source used
for power sensor calibration
(traceable to NIST).
Sensor connector(s)
Sensor input operates with
Agilent 8480 series and E-series
power sensors. This is the
E4418B single-channel power
meter. The E4419B has A and B
channel inputs.
Frequency/cal fac
Frequency: Direct
entry of the test signal
frequency.
Cal factor: For sensor
frequency response
correction (settable
from 1% to 200% with
0.1% resolution).
Preset/local
Returns the power meter to local
control. If already in local, returns
the power meter to the default
condition.
Large LCD display
High resolution display
with back lighting pro-
vides a wide viewing
angle for all the dis-
played data.
Softkeys
Provide user menu
selection.
Rel: Relative mode
uses displayed value as
reference (when active).
Offset: Display offset
values from -99.99 dB
to +99.99 dB can be
set up.
Meas setup
Accesses the menus associated
with the Measurement Setup (for
example, selection of the digital
or analog meter). Also accesses
ratio measurements on the dual-
channel power meter.
Save/recall:
Save and recall up to
10 instrument states.
System/inputs
Accesses the menus associated
with the general power meter
setup (for example, the GPIB
address, sensor cal tables). Also
accesses input offsets, averages,
and other input data.
Display keys
Select the active dis-
play window.
Selectable single and
split screen
formats.
dBm/W
Selectable units of
either Watts or dBm
in absolute power, or
percent, or dB for rel-
ative measurements.