Specifications

Agilent 8510XF system performance

E7340A Option 005 (45 MHz to 85 GHz)

The following specifications describe the system performance of the 8510XF system in the E7340A Option

005 configuration, from 0.045 GHz to 85 GHz. The following system configuration was used to generate the

specifications:

Test set: E7342A Option 005, millimeter controller and two test heads, 45 MHz to 85 GHz

RF sources: 83621B and 83651B synthesized sweepers (one each)

Calibration kit: 85059A 1.0 mm precision calibration/verification kit

Calibration techniques: SOLT to 50 GHz, and offset-shorts from 50 to 85 GHz

Dynamic range (for transmission measurements)

Frequency range (GHz)

0.045 - 2 2 - 18 18 - 40 40 - 50 50 - 65 65 - 75 75 - 85

Maximum power (in)

measured at port 2 0 dBm 0 dBm +10 dBm +10 dBm –3 dBm –3 dBm –3 dBm

Reference power (out)

at port 1 (nominal) 0 dBm 0 dBm –12 dBm –12 dBm –3 dBm –3 dBm –10 dBm

Minimum power (in)

measured at port 2 –74 dBm –104 dBm –84 dBm –84 dBm –80 dBm –80 dBm –70 dBm

Receiver dynamic range 74 dB 104 dB 94 dB 94 dB 77 dB 77 dB 67 dB

System dynamic range 74 dB 104 dB 72 dB 72 dB 77 dB 77 dB 60 dB

Measurement port characteristics

Frequency range (GHz)

RESIDUAL 0.045 - 2 2 - 18 18 - 40 40 - 50 50 - 65 65 - 75 75 - 85

Directivity 30 dB 30 dB 26 dB 24 dB 28 dB 28 dB 28 dB

Source match 27 dB 27 dB 23 dB 21 dB 28 dB 28 dB 28 dB

Load match 27 dB 27 dB 23 dB 21 dB 28 dB 28 dB 28 dB

Reflection tracking ±0.10 dB ±0.10 dB ±0.20 dB ±0.25 dB ±0.30 dB ±0.30 dB ±0.30 dB

Transmission tracking ±0.273 dB ±0.273 dB ±0.429 dB ±0.669 dB ±0.322 dB ±0.340 dB ±0.360 dB

Frequency range (GHz)

RAW (Typical) 0.045 - 2 2 - 18 18 - 40 40 - 50 50 - 65 65 - 75 75 - 85

Directivity 20 dB 20 dB 15 dB 15 dB 13 dB 10 dB 10 dB

Source match 20 dB 20 dB 15 dB 15 dB 13 dB 12 dB 12 dB

Load match 11 dB 11 dB 10 dB 10 dB 10 dB 10 dB 10 dB