Specifications

Agilent 85107B Option 005

45 MHz to 50 GHz

The following specifications describe the system

performance for the 8510C network analyzer in

the 85107B Option 005 (adds step attenuators and bias

tees to the 8517B test set) configuration for 50 GHz mea-

surements. The system hardware includes the

following:

Test set: 8517B S-parameter test set

RF source: 83651B synthesized sweeper

Calibration kit: 85056A 2.4mm calibration kit

Calibration technique: Full two-port calibration with

sliding loads

Dynamic range (for transmission measurements)

Frequency range (GHz)

0.045–2 2–20 20–40 40–50

Maximum power

measured at port 2 +17 dBm +8 dBm +4 dBm –3 dBm

Reference power

at port 1 (nominal) +1 dBm –8 dBm –19 dBm –30 dBm

Minimum power

measured at port 2 –76 dBm –97 dBm –91 dBm –90 dBm

Receiver dynamic range 93 dB 105 dB 95 dB 87 dB

System dynamic range 77 dB 89 dB 72 dB 60 dB

Measurement uncertainty

Reflection measurements

Measurement port characteristics

Frequency range (GHz)

RESIDUAL 0.045–2 2–20 20–40 40–50

Directivity 42 dB 42 dB 38 dB 36 dB

Source match 41 dB 38 dB 33 dB 31 dB

Load match 42 dB 42 dB 38 dB 36 dB

Reflection tracking ±0.001 dB ±0.008 dB ±0.02 dB ±0.027 dB

Transmission tracking ±0.014 dB ±0.043 dB ±0.110 dB ±0.137 dB

Crosstalk 99 dB 110 dB 93 dB 81 dB

Frequency range (GHz)

RAW (Typical) 0.045–2 2–20 20–40 40–50

Directivity 22 dB 18 dB 18 dB 18 dB

Source match 20 dB 12 dB 9 dB 9 dB

Load match 20 dB 12 dB 9 dB 9 dB

Magnitude Phase

System dynamic range