Specifications

Agilent 8510XF system performance

E7350A Option 005 (45 MHz to 110 GHz)

The following specifications describe the system performance of the 8510XF system in the

E7350A Option 005 configuration, from 0.045 GHz to 110 GHz. The following system configuration was used

to generate the specifications:

Test set: E7352A Option 005, millimeter controller and two test heads, 45 MHz to 110 GHz

RF sources: 83621B and 83651B synthesized sweepers (one each)

Calibration kit: 85059A 1.0 mm precision calibration/verification kit

Calibration techniques: SOLT to 50 GHz, and offset-shorts from 50 to 110 GHz

Dynamic range (for transmission measurements)

Frequency range (GHz)

0.045 - 2 2 - 18 18 - 40 40 - 50 50 - 75 75 - 85 85 - 100 100 - 110

Maximum power (in)

measured at port 2 0 dBm 0 dBm +10 dBm +10 dBm 0 dBm 0 dBm 0 dBm 0 dBm

Reference power (out)

at port 1 (nominal) 0 dBm 0 dBm –12 dBm –12 dBm –7 dBm –12 dBm –12 dBm –12 dBm

Minimum power (in)

measured at port 2 –74 dBm –104 dBm –84 dBm –84 dBm –75 dBm –70 dBm –70 dBm –70 dBm

Receiver dynamic range 74 dB 104 dB 94 dB 94 dB 75 dB 70 dB 70 dB 70 dB

System dynamic range 74 dB 104 dB 72 dB 72 dB 68 dB 58 dB 58 dB 58 dB

Measurement port characteristics

Frequency range (GHz)

RESIDUAL 0.045 - 2 2 - 18 18 - 40 40 - 50 50 - 75 75 - 85 85 - 100 100 - 110

Directivity 30 dB 30 dB 26 dB 24 dB 28 dB 28 dB 26 dB 26 dB

Source match 27 dB 27 dB 23 dB 21 dB 28 dB 28 dB 26 dB 26 dB

Load match 27 dB 27 dB 23 dB 21 dB 28 dB 28 dB 26 dB 26 dB

Reflection tracking ±0.10 dB ±0.10 dB ±0.20 dB ±0.25 dB ±0.30 dB ±0.30 dB ±0.30 dB ±0.30 dB

Transmission tracking ±0.273 dB ±0.273 dB ±0.429 dB ±0.669 dB ±0.322 dB ±0.360 dB ±0.451 dB ±0.451 dB

Frequency range (GHz)

RAW (Typical) 0.045 - 2 2 - 18 18 - 40 40 - 50 50 - 75 75 - 85 85 - 100 100 - 110

Directivity 20 dB 20 dB 15 dB 15 dB 11 dB 11 dB 11 dB 8 dB

Source match 20 dB 20 dB 15 dB 15 dB 11 dB 11 dB 11 dB 10 dB

Load match 11 dB 11 dB 10 dB 10 dB 10 dB 10 dB 9 dB 9 dB