Specifications
Before You Start
Agilent Technologies
PSA Series Spectrum Analyzers
Test and Adjustment Software
Before You Start
Check the following before starting the performance test software.
1. Ensure minimum requirements of the PC:
Controller Requirements
❍ 200 MHz Pentium processor or higher
❍ 64 MB RAM or more
❍ 200 MB available hard drive
❍ Operating system: Windows 2000, service pack 3, or Windows NT, service pack 6A.
(Windows XP is not supported at this time)
❍ A standalone PC to GPIB controller with IEEE 488.2 protocol
❍ A VISA communications interface
❍ IE 4.0 or higher
2. Ensure computer has a GPIB Interface Card installed in it before running the software
installation. The recommended card is Agilent model part number 82350A. You may also use a
National Instruments model part number AT-GPIB/TNT or PCI-GPIB.
3. Ensure you have the
proper test equipment. Let all the test equipment and PSA warm up in
accordance to instrument specifications.
http://mktwww.soco.agilent.com/field/lp/PSA/PSAcalSWwebhelp/Getting_Started/getstarthome.htm [5/29/2003 8:46:48 AM]