Technical data

8510XF Service Quick Reference Guide

3-1

3 Making 8510XF Adjustments

NOTE This chapter covers both the CRT and LCD displays. Some display-related

adjustments apply only to instruments with CRT display.

The following table provides adjustments most frequently needed for

8510XF system service. Most of the 8510XF is self-adjusting except for the

following:

Table 3-1 Frequently used 8510XF adjustments

Procedure

1. Reference subsequent sections in this document.

Title Adjustment Function Assembly Adjusted

1 Vertical Alignment Adjustment

2. These adjustments apply to a CRT-based display only.

Aligns softkey labels and mechanical

softkey buttons.

A11

2 Degausing (Demagnetizing) the 85101

display

Demagnetize the display.

3 8360 Series Sources Full User CAL

4 Power Level Calibration Insures level power at the test ports Leveling DAC/ EEPROM, A16,

and Leveling Compensation

Board, A7