Technical data

85108L System Manual
System and Documentation Overview
Manual Overview
1-2
Manual Overview
Use this manual for installation, operation, calibration, performance verification, and
troubleshooting of the pulsed-RF network analyzer system. Consult the manuals of the individual
instruments and accessories in the system when necessary for reference
.
The 85108 system, shown in Figure 1-1, is a factory integrated pulsed-RF system which includes
the following components.
• 8510C Option 008 network analyzer
• 83620B-H80 Options 001, 003, 004, and 008 synthesized sweeper
• 83620B-H80 Options 003, 004, and 008, 0.01 to 2.0 GHz synthesized sweeper
• 85110L 0.045 to 2.0 GHz S-parameter test set
• System cabinet (all system instruments are installed in the cabinet at the factory)
Where to Find Information
Chapter 1, “System and
Documentation Overview”
Includes an overview of the pulsed-RF network analyzer
system and its supporting documentation.
Chapter 2, “System Installation” Includes information regarding site requirements prior to
installation, and cabling/configuration diagrams.
Chapter 3, “Operation” Includes several system operational tests, and instructions for
using the pulsed-RF network analyzer system to make
measurements.
Chapter 4, “Specifications and
Performance Verification”
Includes instructions for obtaining the specifications of your
pulsed-RF network analyzer system and procedures for
running a performance verification of your system.
Chapter 5, “Adjustments” Includes adjustments related to the pulsed-RF portion of the
system. For other adjustments, refer to the service manual of
the individual instrument in question.
Chapter 6, “System Service and
Troubleshooting”
Includes information for troubleshooting the pulsed-RF portion
of the system to the board level, and troubleshooting the rest of
the system to the instrument level. System cabling diagrams
are also included. When the faulty instrument is identified,
refer to its manual for further troubleshooting information.
Chapter 7, “Replaceable Parts” Includes replaceable parts that pertain to the pulsed-RF
portion of the system only. Refer to the replaceable parts
section of the individual instrument for a complete listing of
replaceable parts.
Appendix A, “Glossary of
Pulsed-RF System Terms”
Includes a glossary of pulsed-RF system terms.
Appendix B , “Hardware and
Instrument States”
Contains information on GPIB addresses, power levels, and
hardware and instrument states.
Appendix C, “Loading the System
Configuration Disk”
Details a procedure for loading the 85108L system
configuration disk.
Appendix D, “Avoiding the Effects
of Spurs”
Contains information on avoiding the effects of spurs.