User`s guide

34 82357B User’s Guide
3 Troubleshooting the Agilent 82357B
2 Install Agilent IO Libraries (as required). If Version 15.0
or greater of the Agilent IO Libraries Suite is not installed
on your PC, perform this step.
a Remove the 82357B USB cable from the USB port.
b Insert the Automation- Ready CD into your CD- ROM
drive and follow the instructions in Chapter 1,
“Installing the Agilent 82357B” to install the libraries. If
you do not have the Automation- Ready CD, you can
download the Agilent IO Libraries Suite from
www.agilent.com/find/iolib
c Re- attach the 82357B USB cable to the USB port and
observe the LEDs for at least 10 seconds.
If all three LEDs remain ON, go to Software
Configuration Checks.