User`s guide

Troubleshooting the Agilent 82357B 3
82357B User’s Guide 31
Check Device Manager
You can use the Windows Device Manager to reinstall the
82357B, as required.
Go to Device Manager by selecting Start > Control Panel > System
> Hardware > Device Manager.
For Windows 8, right- click the bottom- left corner of the
Desktop and select Device Manager.
From the Device Manager, select 82357 and then Properties. Tab
to Driver and click Reinstall Driver. This will allow the
Windows Plug- and- Play Manager to begin searching for a
driver for the 82357B. Since the Device Manager may have
disabled the 82357B USB device, click Enable to restart the
82357B.
NOTE
If you are using a USB scanner, scanner conflicts are possible. See Check
USB scanner in the “Software Installation Checks” on page 32.