User`s guide

24 82357B User’s Guide
2 Using the Agilent 82357B
Figure 2-2 Agilent 82357B (High Speed) Interface - USB/GPIB
Changing modes of operation
If your system has multiple 82357Bs configured (multiple
mode operation), the only way to change from multiple mode
of operation to single mode operation is to perform the
following:
1 Unplug all 82357Bs from the system.
2 Run Connection Expert (click the IO icon, then click
Agilent Connection Expert).
3 Delete all 82357B configurations by selecting each
USB/GPIB icon in the explorer view, then clicking Delete
(or delete all except one configuration).
4 Re- attach and re- configure a single 82357B.