User`s guide

Using the Agilent 82357B 2
82357B User’s Guide 23
Setting Configuration Parameters
This section gives guidelines to change or set various
configuration parameters for the 82357B, including:
• Changing Configuration Parameters
• Changing Modes of Operation
• Setting Timeout Floor Value
• Setting High- Performance Operation
Changing configuration parameters
To change the VISA or SICL Interface ID, the LU or GPIB
Address, or if you want to check the values of these
configuration parameters, highlight the USB/GPIB interface
in the explorer view (tree view) of the Connection Expert
window. Click on the Change Properties... button in the
property pane to display the Agilent 82357 Interface dialog box.
Choose the settings you want, then click OK. Clicking Cancel
will cause the configuration set in the preceding dialog box
to be used.
NOTE
Although you can change the Logical Unit (LU) Number and GPIB Address
values for an 82357B, this is generally not necessary and may cause
running applications to fail or stop running.