User`s guide

Installing the Agilent 82357B 1
82357B User’s Guide 3
Step 2: Installing Agilent IO Libraries Suite
This section describes how to install the Agilent IO Libraries
Suite on your PC. The Agilent IO Libraries Suite is a
collection of libraries and utilities that gives you the ability
to use your instruments from instrument control software.
You should install the Agilent IO Libraries Suite as your first
step before installing the hardware because it installs the
necessary software and drivers to control your instruments.
If possible, always use the most recent version of the Agilent
IO Libraries Suite. This version supports the newest
interfaces and operating systems, and has the most
advanced features.
1 Verify that your PC meets the minimum system
requirements. Refer to the IO Libraries Web page at
www.agilent.com/find/iosuite or the IO Libraries
Suite Readme.
2 Close all applications on your computer. Insert the Agilent
Automation- Ready CD in your CD- ROM drive or download
and install the IO Libraries software from
www.agilent.com/find/iosuite.
3 Follow the instructions as prompted during the
installation. You can select either a Typical or a Custom
installation:
• Typi cal - In most cases, you can select the Typical
installation which installs the IO Libraries Suite using
the recommended settings.
NOTE
You must have Administrator privileges to install Agilent IO Libraries Suite
Connection Expert.