User`s guide

Chapter 2 Quick Start
To Program Overvoltage Protection
36
3 Clear the overvoltage condition and exit this menu.
Now, when you press key again, the “DONE” message is displayed for a second
and the OVP annunciator will not blink any more. The output will return to meter
mode.
• Adjust OVP trip level
1 Raise the OVP trip level.
Press key and turn the knob to raise the OVP trip level.
2 Move to the OVP CLEAR mode.
Press key to move to the OVP CLEAR mode. The “OVP ON” message appears
on the display. Turn the knob to the right until the above message appears on the
display.
3 Clear the overvoltage condition and exit this menu.
Now, when you press key again, the “DONE’’ message is displayed for a
second and the OVP annunciator will not blink any more. The output will return to
the meter mode.
OVP CLEAR
Over
Voltage
Over
Voltage
Over
Voltage
Over
Voltage
Over
Voltage
Over
Voltage
Over
Voltage
Over
Voltage