User`s guide

1-7
Getting Started
Setting Up the Agilent 83433A
2
Connect the line-power cord to the rear-panel connector of the instrument.
3
Connect the other end of the line-power cord to the power receptacle.
Various power cables are available to connect the Agilent 83433A to ac power
outlets unique to specific geographic areas. The cable appropriate for the area
to which the Agilent 83433A is originally shipped is included with the unit. You
can order additional ac power cables for use in different geographic areas.
Refer to “Power Cords” on page 3-5.
Voltage nominal: 115 VAC range: 90–132 V
nominal: 230 VAC range: 98–254 V
Frequency nominal: 50 Hz/60 Hz range: 47–63 Hz
Line Power Requirements