User`s guide

Cleaning Information
90 Agilent 81689A, 81689B and 81649A Tunable Laser Modules User’s Guide, Third Edition
The following Cleaning Information contains some general safety
precautions, which must be observed during all phases of cleaning.
Consult your specific optical device manuals or guides for full
information on safety matters.
Please try, whenever possible, to use physically contacting connectors,
and dry connections. Clean the connectors, interfaces, and bushings
carefully after use.
If you are unsure of the correct cleaning procedure for your optical
device, we recommend that you first try cleaning a dummy or test
device.
Agilent Technologies assume no liability for the customer’s failure to
comply with these requirements.
Cleaning Instructions for this Instrument
This Cleaning Information applies to a number of different types of
Optical Equipment.
“How to clean instruments with a physical contact interface” on
page 103 is particularly relevant to this module.