User`s guide

Required Test Equipment Performance Tests

Agilent 81689A, 81689B and 81649A Tunable Laser Modules User’s Guide, Third Edition 47

Required Test Equipment

The equipment required for the Performance Test is listed in Table 4.

Any equipment that satisfies the critical specifications of the

equipment given in Table 4 may be substituted for the recommended

models.

Test Record

Results of the performance test may be tabulated in the Test Record

provided at the end of the test procedures. It is recommended that you

fill out the Test Record and refer to it while doing the test. Since the

test limits and setup information are printed on the Test Record for

easy reference, the record can also be used as an abbreviated test

procedure (if you are already familiar with the test procedures). The

Test Record can also be used as a permanent record and may be

reproduced without written permission from Agilent Technologies.

Table 4 Equipment Required

Instrument Description of Instrument/Accessory #021, #071 #022, #072

Agilent 86142B

Optical Spectrum Analyzer 1 1

Agilent 8164A/B

Lightwave Measurement System 1 1

WA-1500

Burleigh Wavemeter 1 1

81618A or 81619A

Optical Head Interface Module 1 1

81626B

Standard Optical Head 1 1

Agilent 81000SA DIN 47256/4108 Connector Adapter 1 1

Agilent 81000AI HMS-10 Connector Interface 1

Agilent 81000SI DIN 47256/4108 Connector Interface 1

Agilent 81000FI FC/PC Connector Interface 1

Agilent 81101PC Diamond HMS-10/Agilent FC/PC Patchcord 1

Agilent 81113PC Diamond HMS-10/Agilent FC/Super PC Patchcord 1 1

Agilent 81113SC Diamond HMS-10/Agilent DIN 47256/4108 Patchcord 1

You can use the HP 71452B or HP 71450A #100 instead of the Agilent 86142B.

You can use the 8163A/B or 8166A/B instead of the 8164A/B

You can use the 86120C instead of the WA-1500

For the 81689A and 81649A you can use the 81624B or 81627B, instead of the 81626B.

For the 81689A, 81689B and 81649A you can use the 81525A + 81533B instead of

the 81626B + 81618A