User`s guide

Connector Interfaces and Other Accessories Accessories
Agilent 81689A, 81689B and 81649A Tunable Laser Modules User’s Guide, Third Edition 31
Options 022, 072: Angled Contact
Connectors
If you want to use angled connectors (such as FC/APC, Diamond HRL-
10, or SC/APC) to connect to the instrument, you must do the
following:
1 Attach your connector interface to the interface adapter.
See Table 3 for a list of the available connector interfaces.
2 Connect your cable (see Figure 10).
Figure 10 Options 022, 072: Single-mode fiber/PMF with Angled Contact Connectors
Table 3 Angled Contact Connector Interfaces
Description Model No.
DIN 47256-4108.6 Agilent 81000 SI
FC / APC Agilent 81000 NI
SC / APC Agilent 81000 KI
Diamond E-2000 Agilent 81000 HI
Agilent 8100
0KI
Connector
Interface
SC/APC
Agilent 8100
0NI
Connector
Interface
FC/APC
Agilent 8100
0HI
Connector
Interface
Diamond
E-2000
Agilent 8100
0SI
Connector
Interface DIN
47256/4108.6