Technical data

Replacing Assemblies 6
16800 Series Portable Logic Analyzers Service Guide 129
To remove and replace the USB cables
1 Perform previous procedures:
• “To prepare the instrument for disassembly" on
page 116.
• “To remove and replace the cover" on page 118.
• “To remove and replace the front panel assembly" on
page 125.
• “To remove and replace the front panel bracket
assembly" on page 128.
2 Using a Torx T10 screwdriver, remove the 4 screws securing
the USB cables to the front panel bracket assembly.
3 Reverse this procedure to replace the USB cables.
T-10
screws
Front panel bracket
USB
cables