Specifications

79
Chapter 3: Testing Performance
Test Pod 2 in 800 Mb/s mode
c Enter “A” in the “Label 1 = “ field.
14 Adjust the sampling positions using Eye Finder. Be sure to expand “Label1
(4 channels)”. You can use the starting position you noted on page 74.
Bring stray channels into alignment if necessary. See page 56.
15 Determine pass or fail (1 of 2 tests). See page 58.
16 Ensure that the Listing window is set up. See page 58.
17 Select the Run Repetitive icon in the Listing window.
18 Determine pass or fail (2 of 2 tests). See page 60.
Test the complement of the bits (Pod 2, 800 Mb/s mode)
1 Test the complement of the bits on Pod 2. You can use the procedure “Test
the complement of the bits (Pod 1, 800 Mb/s mode)” on page 76 as a
guideline.