Specifications

71
Chapter 3: Testing Performance
Test Pod 2 in 400 Mb/s mode
c Enter “A” in the “Label 1 = “ field.
14 Adjust the sampling positions using Eye Finder. Be sure to expand “Label1
(4 channels)”. Use the starting position you noted on page 67. Realign any
stray channels if necessary. See page 56.
15 Determine pass or fail (1 of 2 tests). See page 58.
16 Ensure that the Listing window is set up. See page 58.
17 Select the Run Repetitive icon in the Listing window.
18 Determine pass or fail (2 of 2 tests). See page 60.
Test the complement of the bits (Pod 2, 400 Mb/s mode)
1 Test the complement of the bits on Pod 2. You can use the procedure “Test
the complement of the bits (Pod 1, 400 Mb/s mode)” on page 69 as a
guideline.