Specifications

68
Chapter 3: Testing Performance
Test Pod 1 in the 400 Mb/s mode
page 56.
20 In the “Setup and Trigger...” window, Clock Setup area, set the clock mode
to “Both Edges.”
21 In the Eye Finder window, align the blue bars vertically. See page 55.
22 Grab the blue bar for “Label1 (4 Channels)” and move it to the
recommended starting position you noted in the prior step.
23 Run Eye Finder again. Some eyes may close, but the eyes in the sampling
position you chose on page 67 should remain open.