Specifications

65
Chapter 3: Testing Performance
Test Pod 2 in 200 Mb/s mode
and the Trigger Functions subtab.
b Select “Find pattern n times” and select the “Replace” button.
c Enter “A” in the “Label 1 = “ field.
15 Adjust the sampling positions using Eye Finder. Be sure to expand “Label1
(4 channels)” and use the recommended starting position noted on page
56. Realign any stray channels if necessary. See page 56.
16 Determine pass or fail (1 of 2 tests). See page 58.
17 Ensure that the Listing window is set up. See page 58.
18 Select the Run Repetitive icon in the Listing window.
19 Determine pass or fail (2 of 2 tests). See page 60.
Test the complement of the bits (Pod 2, 200 Mb/s mode)
1 Test the complement of the bits. See page 62.