Specifications

57
Chapter 3: Testing Performance
Configure the logic analysis system
analyzer in the 1500 Mb/s mode.)
1 Using the mouse, drag the sample position (blue line) of a stray channel so
that it is in the same eye as the other channels (drag channel Label1 [2] in
the above example). The Suggested Position from Eye Finder (green
triangle) will also move to the new eye.
2 Repeat the above step for all remaining stray channels.
3 Select Run Eye Finder. Eye Finder will recalculate the new sample
positions based on the sample position changes. The following example
shows all sampling positions aligned and in the correct eye (with the
analyzer in the 1500 Mb/s mode).