Specifications

53
Chapter 3: Testing Performance
Configure the logic analysis system
a Select the pod threshold field for the pod that you are going to test. The
Pod threshold window will appear. You must have the E5382A Flying
Lead Probe attached to the pod you will be testing so that the pod
threshold dialog will appear when you select the pod threshold field.
b In the Pod threshold window, select User Defined and set the threshold
value to 1 volt. The “Apply threshold settings to all pods” check box
doesn’t matter.
c Select Close to close the Pod threshold window.
d Under the Format tab, use the scroll bar at the bottom of the window to
pod
threshold
field