Specifications

28
Chapter 2: Preparing for Use
To turn on the system
1 Connect the power cable to the mainframe.
2 Turn on the instrument power switch.
When you turn on the instrument power switch, the instrument performs
powerup tests that check mainframe circuitry. After the powerup tests are
complete, the screen will look similar to the sample screen below.
To test the module
The logic analyzer module does not require an operational accuracy calibration or
adjustment. After installing the module, you can test and use the module.
• If you require a test to verify the specifications, see “Testing Performance” on page 31.
• If you require a test to verify correct module operation using software self-tests, see
“To run the self-tests” on page 105.
• If the module does not operate correctly, see “Troubleshooting” on page 101.