Specifications

140
Chapter 7: Replaceable Parts
Replaceable Parts
Ref. Des. Agilent Part Number QTY Description
Exchange Assemblies
16760-69516 Exchange Acquisition Board Assembly
Replacement Assemblies
A1 16760-66516 1 Acquisition Board Assembly
H1 16500-22401 2 Panel Screw
H2 16500-29101 1 Ground Spring
H3 0510-0684 2 Retaining Ring
H4 0515-0372 4 M3.0x0.5 8mm T10 (Cable Clamp to Rear Panel)
H5 0515-0375 4 M3.0x0.5 16mm T10 (Cable Clamp to Acquisition
Board)
H6 0515-0430 3 MSPH M3.0x0.50 6mm T10 (Rear Panel to Acquisition
Board)
MP1 01650-94312 1 Label Set - Probe and Cable
MP2 16760-44107 1 Rear Panel
MP3 16760-44108 4 Logic Analyzer Cable Clamp (two clamps per cable)
MP4 16760-94309 1 Module ID Label
W1 16555-61605 1 Cable (2x20)
W2 16715-60001 1 Master/Expander Cable Kit
W3 16760-61601 2 Logic Analyzer Cable
Accessories for Connectivity to the System Under Test
E5379A Differential Probe
E5378A Single-Ended Probe, 100-pin
E5380A Single-Ended Probe, 38-pin
E5382A Flying Lead Probe
E5381A Differential Flying Lead Probe Set
E5386A Half-channel Adapter
E5387A Differential Soft Touch Connectorless Probe
E5390A Single-ended Soft Touch Connectorless Probe
1253-3620 Samtec Connector
16760-02302 Shroud for 0.062” PC Boards
16760-02303 Shroud for 0.120” PC Boards
16760-68702 *Shroud/Connector Kit for 0.062” PC Boards
16760-68703 *Shroud/Connector Kit for 0.120” PC Boards
1252-7431 MICTOR Connector
E5346-44703 MICTOR Shroud for 0.170” PC Boards
E5346-44704 MICTOR Shroud for 0.125” PC Boards
E5346-68700 *Shroud/Connector Kit for 0.125” PC Boards
*Shroud/Connector kits include connectors (Qty 5) and shrouds (Qty 5) for the indicated system under test circuit board thickness.