Specifications

115
Chapter 5: Troubleshooting
Setup and Trigger. A Setup and Trigger window appears.
c In the logic analysis system window, select the module icon, then select
Listing. A Listing window appears.
4 Set up the Sampling tab
a In the logic analyzer Setup and Trigger window, select the Sampling
tab.
b Under the Sampling tab, select State Mode.
c Select the clock edge field for J-clock, then select Rising Edge.
5 Configure the Trigger settings
a In the logic analyzer Setup and Trigger window, select the Trigger tab.
b Under the Trigger tab, select the Settings tab.
c Select the Acquisition Depth field, then select 8K.
d Select the Trigger Position field, then select Start.