Specifications

114
Chapter 5: Troubleshooting
should illuminate showing that the stimulus board is active
2 Set up the stimulus board.
a Configure the oscillator select switch S1 according to the following
settings:
•S1 Off
•S2 Off
•S3 Off
•Int
b Configure the data mode switch S4 according to the following settings:
•Even
•Count
c Press the Resynch VCO button, then Counter RST (Counter Reset)
button.
3 Set up the logic analyzer
a Open the Session Manager window and select “Start Session.”
b In the logic analyzer system window, select the module icon, then select