Specifications

10
Chapter 1: General Information
Accessories
One or more of the following accessories, not supplied, are required to operate
the 16760A logic analyzer.
Mainframe and Operating System
The 16760A logic analyzer requires an Agilent Technologies 16700-series logic
analysis system with operating system version A.02.20.00 or higher. However, the
specifications apply to operating system version A.02.60.00 or higher. The
mainframe operating system must be upgraded to version A.02.60.00 before
attempting the performance verification procedure in Chapter 3. Request a
software upgrade at http://software.cos.agilent.com/16700 or by contacting your
nearest Agilent Technologies Customer Support Center. Agilent Technologies
16700-series mainframes with serial number prefix lower than US4148 are
factory-installed with operating system versions older than A.02.60.00.
Three Cooling Fans Required in Mainframe
Earlier versions of the 16700A/01A/02A mainframe contained only two cooling
fans and might not provide adequate cooling to ensure reliable performance. If
the first six digits of the 16700A/02A serial number (located on the back of the
instrument) are US3849 or higher, or the first six digits of the 16701A are US3902
or higher, the instrument is a three-fan model, which will supply sufficient
cooling.
All 16700B/01B/02B systems already have three cooling fans which provide
adequate cooling to ensure reliable performance.
Accessories Agilent Part Number
Single-ended soft touch probe E5390A
Differential soft touch probe E5387A
100-pin single-ended probe E5378A
100-pin differential probe E5379A
38-pin single-ended probe E5380A
Single-ended flying lead probe set E5382A
Differential flying lead probe set E5381A