Specifications

35
Chapter 3: Testing Logic Analyzer Performance
Connect the Test Equipment
7 Connect the E5383A Flying Lead Probe Set’s bits 6 and 14 to the SMA/
Flying Lead test connector’s pin strip connector at the 8133A pulse
generator’s Channel 2 OUTPUT.
Connect the 8133A Pulse Generator Output to the 54845A
Oscilloscope
8 Attach Male BNC to Female SMA adapters to Channels 1 and 2 on the
54845A oscilloscope.
9 Attach one end of an SMA cable to the Male BNC to Female SMA adapter
on Channel 1 of the oscilloscope.
10 Attach the other end of the SMA cable to the SMA/Flying Lead connector
at the Channel 2 OUTPUT of the 8133A pulse generator.
11 Attach one end of the other SMA cable to the Male BNC to Female SMA
adapter on Channel 2 of the oscilloscope.
12 Attach the other end of the SMA cable to the SMA/Flying Lead connector
at the Channel 2 OUTPUT
of the 8133A pulse generator.