Technical data

SCPI Commands Reference ARM Commands
92 Agilent 81133A/81134A Pulse Generator Programming Guide, March 2007
:ARM[:SEQuence][:LAYer]:SLOPe
Syntax :ARM[:SEQ][:LAY]:SLOP
Form Set & Query
Description Specifies whether the signal is generated at the rising or falling
edge of the external start signal.
NOTE The threshold can only be specified if the external start mode is
selected (
“:ARM:SOURce EXT”) .
Parameter POSitive|NEGative
•POSitive
The signal is generated at the rising edge.
•NEGative
The signal is generated at the falling edge.
*RST value POS
Example Specifies that the signal is generated at the falling edge.
:ARM:SLOP NEG