Technical data

SCPI Commands Reference TRIGger Commands
86 Agilent 81133A/81134A Pulse Generator Programming Guide, March 2007
TRIGger Commands
The following table shows the Agilent 81133A/81134A Pulse
Generator TRIGger Commands:
Command Parameter Description
:TRIGger
:SOURce[?] IMMediate|EXTernal
|
REFerence|
IDIRect|
EDIRect
Sets/reads timebase mode
internal, external, external 10 MHz
reference, internal direct and
external direct
:TERM[?] Numeric [uV|mV|V] Sets/reads termination voltage
:TERMSTATe[?] ON|OFF Sets/reads termination state.
Defines whether the external clock
input (Clock In) connector is AC or
DC terminated
:TRIG:SOUR[?]
:TRIG::TERM[?]
:TRIG::TERMSTATe[?]