Technical data

SCPI Commands Reference SYSTem Commands
80 Agilent 81133A/81134A Pulse Generator Programming Guide, March 2007
:HADDRess String Set/read host LAN address for the
instrument. This setting is important
for FTP transfer
:NAME alphanumeric Sets the LAN name for the
instrument
:DHCP 1|0|ON|OFF Enables/disables DHCP
configuration
:GPIB
[:SELF]
:ADDR Numeric Sets/reads GPIB bus No. A value
between 0 to 30 is required
Command Parameter Description
:COMMunicate:GPIB[:SELF]:ADDR
:COMMunicate::LAN[:SELF]:ADDRess
:COMMunicate::LAN[:SELF]:SMASk
:COMMunicate::LAN[:SELF]:DHCP
:COMMunicate::LAN[:SELF]:DGATeway