Technical data

SYSTem Commands SCPI Commands Reference
Agilent 81133A/81134A Pulse Generator Programming Guide, March 2007 79
NOTE The Agilent 81133A/81134A Pulse Generator does not use the
transition registers of the QUEStionable:MONotony status group,
therefore, this command is redundant.
Parameter Numeric
*RST value –
Specified limits 0 … 32767
SYSTem Commands
The following table shows the Agilent 81133A/81134A Pulse
Generator SYSTem Commands:
Command Parameter Description
:SYSTem
:ERRor? Reads error queue
:KEY[?] Numeric Simulates key press or reads key
queue
:PRESet *RST without changing display state
:SET[?] Block data Sets/reads complete instrument
setting
:VERSion? Reads SCPI compliance version
:COMMunicate
:LAN
[:SELF]
:ADDRess String Sets/reads instrument's LAN
address. String format is A.B.C.D
with A,B,C,D is number between 1
and 255
:SMASk String Sets/reads subnet mask of current
LAN. String format is similar to
:ADDR
:DGATeway String Sets/reads default Gateway for the
instrument. String format is similar
to :ADDR