Technical data

SCPI Commands Reference Status Handling Commands
74 Agilent 81133A/81134A Pulse Generator Programming Guide, March 2007
Specified limits 0 … 32767
:STATus:QUEStionable:VOLTage:NTRansition
Syntax :STAT:QUES:VOLT:NTR[?]
Form Set & Query
Description Sets or queries the negative- transition register in the
QUEStionable:VOLTage status group.
Parameter Numeric
*RST value –
Specified limits 0 … 32767
:STATus:QUEStionable:VOLTage:PTRansition
Syntax :STAT:QUES:VOLT:PTR[?]
Form Set & Query
Description Sets or queries the positive- transition register in the
QUEStionable:VOLTage status group.
Parameter Numeric
*RST value –
Specified limits 0 … 32767
:STATus:QUEStionable:FREQuency
This command tree accesses the QUEStionable:FREQuency status
group.
The QUEStionable:FREQuency status group monitors the currently
programmed frequency against the specified range, detects if the
PLL in unlocked and indicates if there is a valid signal at the time
base external input.
The following commands are used to access the registers within
this status group.