Technical data

SOURce Commands SCPI Commands Reference
Agilent 81133A/81134A Pulse Generator Programming Guide, March 2007 65
[:SOURce]:VOLTage[1|2]:LIMit:OFFSet?
Syntax [:SOUR]:VOLT[1|2]:LIM:OFFS?
Form Query
Description This command reads the current setting of the offset limit. The
result is only valid if “Limit to current levels” output mode is
currently on (
[:SOURce]:VOLTage[1|2]:LIMit:STATe ON ).
*RST value 0 mV
Example Read Channel 1 offset limit.
:VOLT1:LIM:OFFS?
[:SOURce]:VOLTage[1|2]:LIMit:HIGH?
Syntax [:SOUR]:VOLT[1|2]:LIM:HIGH?
Form Query
Description This command reads the current setting of the high- level limit. The
result is only valid if Limited output mode is currently on
(
[:SOURce]:VOLTage[1|2]:LIMit:STATe ON ).
*RST value 100 mV
Example Read Channel 1 high- level limit.
:VOLT1:LIM:HIGH?
[:SOURce]:VOLTage[1|2]:LIMit:LOW?
Syntax [:SOUR]:VOLT[1|2]:LIM:LOW?
Form Query
Description This command reads the current setting of the low- level limit. The
result is only valid if “Limit to current values” mode is currently
on (
[:SOURce]:VOLTage[1|2]:LIMit:STATe ON ).
*RST value 0 V
Example Read Channel 1 low- level limit.
:VOLT1:LIM:LOW?