Technical data

SCPI Commands Reference SOURce Commands
56 Agilent 81133A/81134A Pulse Generator Programming Guide, March 2007
[:SOURce][:PULSe]:DESKew[1|2]
Syntax [:SOUR][:PULS]:DESK[1|2][?]
Form Set & Query
Description This command programs the deskew for a channel. The deskew
allows you to move the zero- point of the delay (and phase)
parameter by ±
10 ns.
The final delay at the output is Delay + Deskew.
Parameter Numeric [ps|ns|us|ms|s]|MIN|MAX
Range coupling Delay, Phase
*RST value 0.0
Specified limits –10E–9 … 10E–9, but deskew and delay must be within the delay
limits.
Absolute limits –10E–9 … 10E–9
Example Set Channel 1 deskew to –155 ps.
:DESK1 -155PS
[:SOURce][:PULSe]:DHOLd[1|2]
Syntax [:SOUR][:PULS]:DHOL[1|2][?]
Form Set & Query
Description Defines whether the pulse delay or the pulse phase of a channel is
held constant when the signal frequency is changed.
Parameter DELay|PHASe
*RST value DELay
Example Hold Channel 1 Delay fixed when frequency varies.
:DHOL1 DEL