Technical data

Agilent 81133A/81134A Pulse Generator Programming Guide, March 2007 5
Contents
About This Programming Guide 3
Introduction 9
Connecting to the Pulse/Pattern Generator for Remote
Programming 11
Connecting to the Instrument via GPIB 11
Example for Connecting via GPIB 12
Connecting to the Instrument via LAN 13
Configuring the Agilent IO Libraries 13
Example for Connecting via LAN 14
Connecting to the Instrument via USB 15
SCPI Commands Reference 17
Common Commands 19
Standard Settings 21
DIAGnostic Commands 23
:CAL:TIM 24
:DIAG:CHANnel[1|2]:PPERformance 24
DIGital Commands 25
:DIGital[1|2][:STIMulus]:PATTern[:DATa] 27
:DIGital[1|2][:STIMulus]:PATTern:LDATa 29
:DIGital[1|2][:STIMulus]:PATTern:LENGth 31
:DIGital[1|2][:STIMulus]:SIGNal:FORMat 31
:DIGital[1|2][:STIMulus]:SIGNal:POLarity 32
:DIGital[1|2][:STIMulus]:SIGNal:
CROSsover:[VALue] 32
:DIGital[1|2][:STIMulus]:SIGNal:
CROSsover:[STATe] 34
DISPlay Commands 35
:DISPlay[:WINDow][:STATe] 35
MEASure Commands 36
:MEASure:FREQuency? 37