Technical data

SCPI Commands Reference DIGital Commands
34 Agilent 81133A/81134A Pulse Generator Programming Guide, March 2007
:DIGital[1|2][:STIMulus]:SIGNal:
CROSsover:[STATe]
Syntax :DIG[1|2][:STIM]:SIGN:CROS:STAT[?]
Form Set & Query
Description For each channel, the crossover mode of the NRZ signal in PRBS
or data pattern mode can be enabled. This is used to artificially
close the eye pattern, simulating distortion.
If you enabled the variable crossover mode, specify the variable
crossover point with
“:DIGital[1|2][:STIMulus]:SIGNal:
CROSsover:[VALue]” on page 32.
Parameter ON|OFF|1|0
*RST value OFF|0
Example Enable the variable crossover mode.
:DIG:SIGN:CROS:STAT ON