Technical data

DIGital Commands SCPI Commands Reference

Agilent 81133A/81134A Pulse Generator Programming Guide, March 2007 25

DIGital Commands

The following table shows the Agilent 81133A/81134A Pulse

Generator DIGital commands:

Command Parameter Description

:DIGital[1|2]

[:STIMulus]

:PATTern

[:DATa][?] <data>, [HEX |

BIN | DUAL]

Sets/reads data in hexadecimal

(default), binary or dual format;

this command is for data pat

terns with maximum 8192 bits

:LDATa <data>

Sets data in hexadecimal for-

mat; this command is for data

patterns larger than 8192 bits

:LENGth[?]

Numeric Sets/reads data pattern length

in bits (32 ... 8192) in steps of 32

:SIGNal

:FORMat[?] RZ | NRZ | R1

Sets/reads the signal mode

:POLarity[?] NORMal |

COMPlement |

INVerted

Sets/reads data polarity

:CROSsover

:[VALUE][?]

Numeric Sets/reads crossover

:STATe[?] ON | OFF | 1 |

Switches crossover on/off