Technical data

SCPI Commands Reference DIAGnostic Commands
24 Agilent 81133A/81134A Pulse Generator Programming Guide, March 2007
:CAL:TIM
Syntax :CAL:TIM
Form Set
Description Calibrates the timing system of the instrument.
NOTE Execution of this command can take about 15 minutes.
*RST value –
:DIAG:CHANnel[1|2]:PPERformance
Syntax :DIAG:CHAN[1|2]:PPER[?]
Form Set & Query
Description This command is used to modify the specified transition time of
the signal.
For the specified transition time, please refer to the Technical
Specification delivered on the product CD.
Parameter NORMal|FAST|SMOoth
•Normal
Produces pulses with the standard transition time specified for
the instrument.
For the specified transition time, please refer to the Technical
Specification delivered on the product CD.
•Fast
Reduces the transition time. This leads to a higher slew rate but
more overshoot.
• Smooth
Produces a rounder output pulse, with lower slew rate and less
overshoot.
*RST value Normal
Example Set the Peak Performance to Fast.
:DIAG:CHANnel:PPER FAST