Technical data

Agilent 81133A/81134A Pulse Generator Programming Guide, March 2007 11
Connecting to the Pulse/Pattern
Generator for Remote Programming
The following sections show how to establish the connection
between your control PC and the instrument through the available
remote interfaces.
Connecting to the Instrument via
GPIB
You can use GPIB connections only for controlling the instrument
by means of SCPI commands.
To connect to the instrument via GPIB you have to:
• Use GPIB cables to connect the instrument to the test
environment.
• Specify the instrument’s GPIB address.
The address is displayed on the user interface. The default
address is 13. It can be changed on the user interface in the
Config Page or with the command
“:SYSTem:COMMunicate:GPIB[:SELF]:ADDR” on page 85 .