Technical data

Agilent 81133A/81134A Pulse Generator Programming Guide, March 2007 101
Differences between the 8133A and
the 81133A/81134A
This chapter shows you how to adapt a program written for the
8133A 3 GHz Pulse Generator to the new 81133A/81134A
instrument.
New Commands The following tables list all commands new for the 81133A/81134A
pulse/pattern generator:
DIAGnostic Commands
“:DIAG:CHANnel[1|2]:PPERformance” on page 24
DIGital Commands
“:DIGital[1|2][:STIMulus]:PATTern:LENGth” on page 31
“:DIGital[1|2][:STIMulus]:SIGNal: CROSsover:[VALue]” on page 32
“:DIGital[1|2][:STIMulus]:SIGNal: CROSsover:[STATe]” on page 34
OUTPut Commands
“:OUTPut:CENTral” on page 44
SOURce Commands
“[:SOURce]:FUNCtion:MODe[1|2]” on page 51
“[:SOURce]:PM[1|2]” on page 59
“[:SOURce]:PM[1|2]:SENSitivity” on page 59
“[:SOURce]:VOLTage[0|1|2][:LEVel] [:IMMediate]:TERM” on page 64