Programming instructions

60
Using the Agilent 81101A
The Output Screen
NOTE
The leading and trailing edges are independently programmable within
certain ranges only, see Transition Times in the Reference Guide.
NOTE
You cannot have the width format set to D
TY
C
YC
and the leading/trailing-
edge format set to percentage of width (L
EAD
E%/T
RAI
E%) at the same
time.
Pulse Trailing Edge Parameter
Set the trailing edge transition-time of the pulse, measured from 10% to
90% of the pulse amplitude. There are three formats available:
=L
EAD
E (select =L
EAD
E)
The trailing edge transition time is coupled directly to the leading
edge to maintain a symmetrical pulse.
T
RAI
E (select A
BSOLUTE
)
The absolute transition time measured from 90% to 10% of the pulse
amplitude. In this format the trailing edge is independent of the
leading edge and the pulse width.
T
RAI
E% (select %
OF
W
ID
)
The trailing edge transition time expressed as a percentage of the
pulse width. In this format, if you adjust the pulse width, the
transition time is adjusted to maintain the edge time as a percentage
of the width.
NOTE
The leading and trailing edges are independently programmable within
certain ranges only, see Transition Times in the Reference Guide.
NOTE
You cannot have the width format set to D
TY
C
YC
and the leading/trailing
edge format set to percentage of width (L
EAD
E%/T
RAI
E%) at the same
time.