Specifications
Table Of Contents
- General Information
- Preparing for Use
- To inspect package contents
- To connect power
- To connect the mouse, keyboard, LAN, printer, and GPIB cable
- To connect the standard 10073C probes
- To connect optional InfiniiMax oscilloscope probes
- To connect the digital probe
- Digital probe lead set
- To tilt the oscilloscope upward for easier viewing
- To turn on the oscilloscope
- To turn off the oscilloscope
- To verify basic oscilloscope operation
- Installing application programs on Infiniium
- Changing Windows System Settings
- To clean the oscilloscope
- Testing Performance
- Calibrating and Adjusting
- Troubleshooting
- To install the fan safety shield
- To troubleshoot the oscilloscope
- Primary Trouble Isolation
- No Display Trouble Isolation
- To check the backlight inverter voltages
- To check the display board video signals
- Power Supply Trouble Isolation
- To check probe power outputs
- To Check the keyboard
- To check the LEDs
- To check the motherboard, CPU, and RAM
- To setup the BIOS
- To troubleshoot the acquisition system
- Software Revisions
- Replacing Assemblies
- To return the oscilloscope to Agilent Technologies for service
- To remove and replace the top cover
- To remove and replace the bottom sleeve
- To disconnect and connect Mylar flex cables
- To remove and replace the CD-ROM drive
- To remove and replace the AutoProbe assembly
- To remove and replace the internal digital input cable (MSO models only)
- To remove and replace the backlight inverter board
- To remove and replace the front panel assembly
- To remove and replace the keyboard, touch screen, and flat-panel display assemblies
- To remove and replace the acquisition board assembly
- To remove and replace the PCI bridge board
- To remove and replace the display board
- To remove and replace the hard disk drive
- To remove and replace the motherboard
- To replace the Intel motherboard with the ADLINK motherboard
- To remove and replace the power supply
- To remove and replace the fan controller board
- To remove and replace a fan
- To remove and replace the probe power and control assembly
- Replaceable Parts
- Theory of Operation
- Index
159
A
accessories, 13, 14
supplied, 20, 21
airflow requirements, 23
application software, 34
Autoscale, 33
B
back panel connections, 24
BNC connectors, 25, 27
C
cables
power, 139
printer, 24
calibration, 68
output, 33
cautions
cleaning, 35
disconnecting probes, 27
environmental, 17
measurement category, 17
checking the oscilloscope, 20
cleaning the oscilloscope, 35
clearance requirements, 23
configuration
default, 33
connecting
GPIB, 24
LAN card, 24
power, 23
printers, 24
probes, 25, 27
contents
of oscilloscope package, 20
controlling the oscilloscope, 24
cord, power, 139
D
default setup, 33
dimensions, 18
direct mail parts order, 138
display board, 82
E
environmental category, 17
F
feet
using, 31
Flluke MET/CAL procedures, 39
front panel
connections, 25, 27
G
GPIB
connecting, 24
I
inspecting the oscilloscope, 20
Installing
application software, 34
instrument controller, 24
instrument options, 15
L
LAN card, 24
M
manuals, 20, 21
measurements, 18
motherboard, 88
ADLINK, 90
Intel, 89
mouse, 24
verifying operation, 33
O
operation
verifying, 33
options available, 15
oscilloscope
cleaning, 35
inspecting, 20
oscilloscope feet, 31
oscilloscope operation
verifying, 33
oscilloscope probes, see probes
P
package contents, 20, 21
packing for return, 97
parallel printers, 24
parts
direct mail ordering, 138
pointing device
connecting, 24
verifying operation, 33
power
applying, 32
connecting, 23
cords, 139
requirements, 23
turning off, 32
printer
cables, 24
connecting, 24
probes
connecting, 27
probes available, 14
probing a circuit, 26
R
replacing parts, 138
returning the instrument, 97
RJ-45 connector, 24
LAN card, 24
S
screen saver, 34
self-calibration, 68
setup
default, 33
specifications, 16
standard accessories, 20, 21
system settings, 34
T
tilting the oscilloscope, 31
V
verifying basic operation, 33
view angle, changing, 31
W
Windows system settings, 34
Y
year of manufacture, 11
Index