Service manual

† These parts are not compatible with older version fixed handles or their corresponding front panels. To replace one or more of these
old parts, you must order all three new parts (Top and Bottom Handle Kits AND Front Panel).
Table 3-1. Agilent E1330A Replaceable Parts
Reference
Designator
Agilent Part
Number Qty Part Description
Mfr.
Code
Mfr. Part
Number
ASSEMBLIES and CABLES
(See Figure 3-1)
E1330-66201 1 REPLACEMENT ASSEMBLY 28480 E1330-66201
A1 E1330-66501 1 PC Assembly - Digital I/O 32-Channel 28480 E1330-66501
CBL1 E1330-61603 1 Test Cable (issued with Service Kit) 28480 E1330-61603
CBL2-CBL3 E1330-61601 2 Ribbon Cable (not illustrated) 28480 E1330-61601
MP1 E1300-45101† 1 HNDL-KIT TOP, Agilent† 28480 E1300-45101†
MP2 E1300-45102† 1 HNDL-KIT BTM, VXI† 28480 E1300-45102†
F1 2110-0712
1
Fuse-subminiature 4A 125V NTD AX
75915
R251004T1
J1-J2 1252-1044 2 Connector-post type .100-pin-spcg 60-contact 76381 3372-5302
J12 1251-6515 1 Connector-post type .100-pin-spcg 6-contact 18873 67996-606
J15-J16 1251-4927 2 Connector-post type .100-pin-spcg 16-contact 76381 2416-6182TB
J51-J54 1251-4682 4 Connector-post type .100-pin-spcg 3-contact 27264 22-10-2031
P1 1252-1596 1 Connector-post type 2.54-pin-spcg 96-contact 00779 536010-5
P15 1258-0247 1 Four-position Jumper 22526 69146-204
P51-P57 1258-0141 7 Removable Jumper 00779 530153-2
PNL1 E1330-00212† 1 PNL-RR 4 CH DAC† 28480 E1330-00212†
SCR1-SCR2 0515-2140 2 SCR-THD-RLG M2.5 X0.45 14mm 28480 0515-2140
SCR3-SCR4 0515-1968 2 Screw M2.5 X 0.45 11mm-long pan-head 28480 0515-1968
SCR5-SCR6 0515-2743 2 SCR-FH M2.5 X 8 THREAD ROLLING 28480 0515-2743
SW1 3101-3066 1 Switch-dip Rocker 8-1A 0.15A 30 VDC 81073 76YY22968S
3-2 Replaceable Parts