Service manual

Digital I/O Module
Serial Numbers
Digital I/O modules covered by this manual are identified by a serial
number prefix listed on the title page. Agilent Technologies uses a two-part
serial number in the form XXXXAYYYYY, where XXXX is the serial
prefix, A is the country of origin (A=USA), and YYYYY is the serial suffix.
The serial number prefix identifies a series of identical instruments. The
serial number suffix is assigned sequentially to each instrument.
The serial number plate is located on the backplane connector. If the serial
number prefix of your instrument is greater than the one listed on the title
page, a Manual Update (as required) will explain how to adapt this manual
to your instrument.
Digital I/O Module
Options
There are no electrical or mechanical options available for the Agilent
E1330A/B Digital I/O Modules.
General Information 1-5