Mainframes User's Manual

Agilent E1330A Quad 8-Bit Digital Input/Output Menu Menu Levels and Content
Level 1 Level 2 Level 3 Level 4 User Ent r y Command( s) Used Descript ion
DIG_I/ O MONITOR PORT0 DISP:MON:CHAN 0;STAT ON Monitor instrument operations on port 0
PORT1 DISP:MON:CHAN 1;STAT ON Monitor instrument operations on port 1 PORT2 DISP:MON:CHAN 2;STAT ON Monitor instrument operations on port 2 PORT3 DISP:MON:CHAN 3;STAT ON Monitor instrument operations on port 3 AUTO DISP:MON:CHAN AUTO;STAT ON Monitor instrument operations on any
active port
READ R_BYTE PORT0 DIG:HAND0:MODE NONE;:MEAS:DIG:DATA0? Reads port 0 after handshake
PORT1 DIG:HAND1:MODE NONE;:MEAS:DIG:DATA1? Reads port 1 after handshake PORT2 DIG:HAND2:MODE NONE;:MEAS:DIG:DATA2? Reads port 2 after handshake PORT3 DIG:HAND3:MODE NONE;:MEAS:DIG:DATA3? Reads port 3 after handshake
R_BIT PORT0 bit (0-7) DIG:HAND0:MODE NONE;:MEAS:DIG:DATA0:BITm? Reads bit m on port 0 after handshake
PORT1 bit (0-7) DIG:HAND1:MODE NONE;:MEAS:DIG:DATA1:BITm? Reads bit m on port 1 after handshake PORT2 bit (0-7) DIG:HAND2:MODE NONE;:MEAS:DIG:DATA2:BITm? Reads bit m on port 2 after handshake PORT3 bit (0-7) DIG:HAND3:MODE NONE;:MEAS:DIG:DATA3:BITm? Reads bit m on port 3 after handshake
WRITE W_BYTE PORT0 data (0-255) DIG:HAND0:MODE NONE;:DIG:DATA0 < data> Writes data to port 0
PORT1 data (0-255) DIG:HAND1:MODE NONE;:DIG:DATA1 < data> Writes data to port 1 PORT2 data (0-255) DIG:HAND2:MODE NONE;:DIG:DATA2 < data> Writes data to port 2 PORT3 data (0-255) DIG:HAND3:MODE NONE;:DIG:DATA3 < data> Writes data to port 3
W_BIT PORT0 bit (0-7), value (0,1) DIG:HAND0:MODE NONE;:DIG:DATA0:BITm < value> Writes data to bit m on port 0
PORT1 bit (0-7), value (0,1) DIG:HAND1:MODE NONE;:DIG:DATA1:BITm < value> Writes data to bit m on port 1 PORT2 bit (0-7), value (0,1) DIG:HAND2:MODE NONE;:DIG:DATA2:BITm < value> Writes data to bit m on port 2 PORT3 bit (0-7), value (0,1) DIG:HAND3:MODE NONE;:DIG:DATA3:BITm < value> Writes data to bit m on port 3
2-22 Using the Display Terminal Interface